E-flite Mini Ultra Stick ARF - Manual (Page 29)

Final Assembly
Required Parts
• Fuselage
• Wing
• Battery
• Battery hatch
• 4-40 x 3/4" socket head bolt (2)
• #4 washer (2)
• Hook and loop tape
• Hook and loop strap
Required Tools and Adhesives
• Hex wrench: 3/32"
 1. With the aircraft fully assembled, install the
battery into the battery compartment. Secure the
battery using the hook and loop tape and a hook
and loop strap.
Note: Place a piece of hook and loop tape on
the bottom of the battery and on the fuselage
where the battery rests. This will keep the
battery from shifting forward or backward
during extreme maneuvers.
29