E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 10)

10 E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
 8. Plug the leads from the motor to the speed
control. Attach the speed control using double-sided
tape as shown.
 9. Use double-sided tape to secure the receiver
inside the fuselage. Position the antenna wires
according to your radio manual. Never shorten the
receiver antenna wire, as this will greatly reduce the
range of your radio system.
 10. Turn on the transmitter and bring the throttle trim
and stick to the low throttle position. Plug the battery into
the speed control and check the operation of the motor.
It should rotate counterclockwise when viewed from the
front of the aircraft. Use the instructions provided with
your ESC to make corrections to the direction of rotation
of the motor if necessary.