E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 11)

11 E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
Rudder and Elevator Installation
Required Parts
• Rudder/Fin • Elevator/Stabilizer
• Micro control horn (2) • Micro control horn backplate (2)
Required Tools and Adhesives
• Square • Foam-safe CA
• Sandpaper
 1. Position the rudder/fin tab into the slot in the
stabilizer/elevator. The yellow side of the stabilizer/
elevator faces the rudder/fin. Use a square and foam-
safe CA to glue the two items together, making sure the
rudder/fin is square to the stabilizer/elevator.
  2. Slide a micro control horn into the slot in the elevator
from the bottom.
  3. Slide the micro control horn backplate onto the control
horn from the opposite side of the elevator as the horn.
Apply a few drops of foam-safe CA onto the backplate to
secure it to the horn.