E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 20)

0 E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
 4. Slide a wheel onto the axle. Use a wheel retainer to
secure the wheel.
Hint: Use medium foam-safe CA on the retainer if it
is not snug on the axle. Use care not to glue the wheel
to the axle.
Wing Rigging Installation
Required Parts
• Airframe • Rigging thread
Required Tools and Adhesives
• Foam-safe CA
Note: Installing the rigging will add to the appearance
and strength of your airplane, but you will not be able to
remove the wings without cutting the rigging. The rigging
is required if you plan on any type of aggressive flying
with your Jenny.
  1. Pass the rigging thread through the hole in the outer
strut as shown.