E-flite Jenny JN-4 Slow Flyer 250 ARF - Manual (Page 21)

1 E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
  2. Guide the thread through the hole in the inner strut.
  3. A tube has been installed in the fuselage to
pass the rigging thread through to the opposite side
of the fuselage.
  4. The rigging thread goes through the hole in the inner
strut then to the outer strut. Glue the thread to the strut
using foam-safe CA.
  5. Apply very light tension to the rigging thread and
apply foam-safe CA to the thread to attach it to the strut.
Use scissors to cut the rigging thread once the CA cures.