GBC 64C - Manual (Page 24)

SPIRE II Series – Installation and Operating Instructions
Page 5-10
p
oWer
Figure 26. Power Panel.
p
oWer
p
anel
The Power Panel includes the Power Cord and an
ON/OFF Switch. The Power Cord is removable at
the laminator and has a NEMA 5-15 plug at the wall
socket end.
on/oFF s
WItch
To apply power to the laminator, press the ON/OFF
switch to the
ON (I) position. To disconnect power
to the laminator, press the switch to the OFF (O)
position.
c
astors
Figure 27. Castor and Locking Pad.
The swivel Castors allow the laminator to be rolled
into position and two of the castors can be locked to
prevent movement.
Press the ON pad (A) to lock the wheel and Press
OFF (B) to release.
WARNING: Keep the Power Cord away
from the Castors. Castors can damage the Power
Cord. If the Power Cord insulation is damaged,
disconnect the plug from the receptacle and contact
your dealer, distributor or Technical Service for
assistance.