GBC 62fm - Manual (Page 6)

Operating Instructions
1-2
62FM L
AMINATOR
E
LECTRICAL
The laminator should be connected only to a source
of power as indicated in these instructions and on
the serial plate located on the rear of the laminator.
Contact an electrician should the attachment
plug provided with the laminator not match the
receptacles at your location.
CAUTION: The receptacle must be located
near the equipment and easily accessible.
Disconnect the plug from the receptacle and contact
your dealer/distributor when one or more of the
following has occurred.
The power supply cord or attachment plug is
damaged.
Liquid has been spilled into the laminator.
The laminator is malfunctioning after being
mishandled.
The laminator does not operate as described in
these instructions.
S
ERVICE
Perform only the routine maintenance procedures
referred to in these instructions.
Warning: Do not attempt to service or repair
the laminator. Failure to observe this warning could
result in severe bodily damage or death.
•
•
•
•