Technical service & support bulletin – GBC 25e User Manual
Page 47
TECHNICAL SERVICE & SUPPORT BULLETIN
T.S.S.B. NO.
1019
DATE:
5/31/07
MODEL:
PATRIOT 25HC, 12HR, 38HC, 25E, 27HS, 62C
SUBJECT:
ROHS & NON-ROHS MAIN P.C. BOARDS
PAGE: 1 of 1
The Patriot laminators manufactured with (S/N#SK) and below will continue to use
the non ROHS complaint Main P.C. Boards. Listed below are the part numbers to use
when ordering.
25HC P/N# 706011106
12HR P/N# 706011106
38HC P/N# 706011106
25E P/N# 1722914
NOTE: The Patriot 25E and the Ultima 65-1 use the same Main P.C. Board. The triac that
comes with this kit is not used on the Patriot 25E. It can be used with the Ultima 65-1.
Patriot laminators manufactured with (S/N#SL) and above will use the ROHS
compliant Main P.C. Boards. Listed below are the part numbers to use when ordering.
25HC P/N# 638900406
12HR P/N# 638900406
38HC P/N# 638900406
25E P/N# 638900405
Note: All ROHS compliant Main P.C. Boards can use the same Infrared heat Sensor P/N#
639400018
There are two models of the Patriot laminators that are compatible for both before and
after ROHS compliant Main P.C. Boards. These part numbers stay the same.
27HS P/N# 706011011
62C P/N# 706011145
10303 80
th
Avenue, Pleasant Prairie, WI 53158 • PH 800-723-4000 • fax 888-821-