GunVault GV 2000 User Manual

Page 10

Advertising
background image

- 9 -

GVB 1000 and GVB 2000 Models

Enrolling Your Personal Finger Print

S1 Button

All BIO units are sent in DEMO mode. This

allows the unit to open without a fingerprint by
pressing the S1 button.

To enroll the first fingerprint, first open the

unit using the default demo mode by pressing the
S1 button. Immediately after the door opens press
and hold S1 button over 1 second until 2 beeps
sound. Then press S1 button to activate the
module and place your finger on the reader. Hold
your finger on the reader until the Green light is
on and there’s two beeps (it may need about 1-2
seconds). The fingerprint is now enrolled.

Fingerprint Reader

Now the first fingerprint is enrolled. (Up to 15
users can be enrolled)

Notice: The 1

st

and 2

nd

enrolled fingerprints

function as administrators which allow the
enrollment of additional users.

Close the Door and Practice

SECURE YOUR KEYS!

DO NOT LOCK THEM INSIDE THE SAFE!

Practice opening the door with the enrolled finger.

Place index finger on the Fingerprint Reader.

Press S1 button to activate the module.

The Red light is on, hold the finger on the reader until the Green light is on (it may need
about 1-2 seconds).

The door will open; the Green light blinks for 6 seconds.

Advertising
This manual is related to the following products: