Maintenance – all models – GunVault GV 2000 User Manual

Page 13

Advertising
background image

- 12 -

Maintenance – All Models

Low Battery Warning Indicator

GV 1000/2000S – Seven red flashes and seven beeps when the valid access code is entered.

GV 1000/2000D – Audio alert which sounds once per hour in the form of two beeps.

GVB 1000/2000 – Red LED flashes with three beeps when an enrolled print opens the unit.

Battery Replacement

Warning: Replace the batteries once a year regardless of whether or not the low battery
indication is observed.

Always check carefully to be sure that all of your batteries are facing in the correct direction (i.e.
positive (+) end to positive symbol, negative (-) end to negative symbol). One battery facing the
wrong way will lower the power output of your battery tray, potentially causing unreliable
operation.

After replacing the batteries, or when power has been disconnected for more than a few seconds,
the unit will revert to the factory-default code (one, two, three, four) and you must re-program
your personal access code(s).

Lubrication

It’s a good idea to lightly coat the door hinge spring and door latch-loop with quality oil at least
once a year. Never spray anything into the latch mechanism.

Removable Shelf (GV 2000S/2000D and GVB 2000 Only)

The MultiVault (large model) has a removable shelf, which can be easily pulled out to allow for
storage of larger items. If the shelf is removed, it should be stored carefully to avoid damage or
loss. To reinstall, simply slide the shelf back into the shelf guide slots. The beveled edge faces
front.

Extra/Lost Keys

Go to Support.CannonSafe.com to download the key order form. A copy of the original receipt or the serial

number will be required to order extra/lost keys.

NO EXCEPTIONS!

Call Technical Services to order at (800) 222-1055.

Advertising
This manual is related to the following products: