GunVault GV 2000 - Manual (Page 5)

- 4 -
Getting Started – All Models
Securing Your Keys
REMOVE YOUR KEYS AND SECURE THEM!
DO NOT LOCK THEM IN THE SAFE!
Think carefully about storing your keys. If the key for a GunVault safe is
on your key chain, an unauthorized person might gain access to it. Never
hide or leave GunVault keys where children could gain access to them. If
you have a bank safe deposit box, one key could be kept there in case you
lose one.
IMPORTANT: We recommend that you ONLY use Duracell 9v batteries. One (1) 9v
battery is required.
Locating the Battery Holder
With your palm up, reach inside the GunVault safe and find the far
end of the ceiling foam.
Pinch the far end, and carefully pull it part of the way out of the unit
(like the tongue of a shoe). DO NOT TEAR IT LOOSE!
The 9v battery holder is located inside on the roof attached to the
back of the lock body.
Installing the 9v Battery
Position the safe with the door facing you, keypad upward.

Connect the power cable to the 9v battery. You will hear a beep audio signal, confirming
that power is connected.

When installing the 9v battery into the battery holder be careful not pinch the power
cable.

Press the 9v into battery holder position.

Press the foam ceiling back into your unit to cover the battery.