IDX CW-7 - Manual (Page 12)

10
7. SDI IN Connect to the video source.
8. SDI OUT SDI Loop-through output
Use for video monitoring
9. UNI/MULTI SW Select the link mode.
 UNI :Unicast mode
 MULTI :Multicast mode
10. DC-IN Use when external power is connected.
 Connector : XLR-4P male connector
 Input range: DC 11 ~ 17V
 Pin assign : No.1:negative(-) No.4:positive(+)
11. V-Plate Attach the TX onto the V-Mount camera.
12. Screw hole (Bottom) Screw hole for mounting (3/8inch).
⑦
⑧
⑨
⑩
⑪
⑫