IDX CW-7 - Manual (Page 14)

12
6. SDI-1 OUT Connect to the monitor, recorder, etc.
7. SDI-2 OUT Buffered out of SDI-1
9. UNI/MULTI SW Select the link mode.
 UNI :Unicast mode
 MULTI :Multicast mode
9. DC-IN Use when external power is connected.
 Connector : XLR-4P male connector
 Input range: DC 11 ~ 17V
 Pin assign : No.1:negative(-) No.4:positive(+)
10. V-Plate Attach the RX to the V-Mount monitor, etc.
11.Screw hole (Bottom) Screw hole for mounting (3/8inch).
⑥
⑦
⑧
⑨
⑩
⑪