IDX CW-5HD - Manual (Page 20)

- 20 -
Display / Operation
Power switch Power ON/OFF
Input battery power runs through to the output side when the power is OFF.
Frequency
selector 5-position rotary switch
selecting CH1, CH2, CH3, CH4, AUTO
Transmitted
output switch Slide switch shifting HIGH/LOW
UNI/MULTI
switch Slide switch UNI/MULTI
UNI：Unicast mode（1:1 communication / encrypted）
MULTI：Multicast mode（1:n communication / not encrypted）
Status indicator LED in 2 colours: Red, Green ×3
Power
Power supply Battery in：11-17V （using P-V2 IDX V-Mount）
DC input：11-17V [XLR-4 male : No.1 negative (-)/ No.4 positive (+)]
Power output V-Plate (IDX A-NH2E or equivalent)
Applicable
batteries IDX ENDURA series Li-ion batteries
Battery input power runs through out to the transmitting device.
Automatically switched to battery supply if DC supply fails.
Physical Characteristics
Size Width 158mm (6.22”) Depth 72mm (2.83”)
Height 188mm (7.40”)
Weight 800g approx.
(1.76lbs approx.)
Power
consumption 12W max. (approx.)
Operation
temperature 0～40℃（No Dew）
Approved
standards FCC: Part 15C, Part 15E