IDX CW-5HD - Manual (Page 7)

- 7 -
2. Getting Started
2.1. CW-5HD TX
（ Transmitter）
1. POWER MODE LED Indicates selected power output mode
2. LINK STATUS LED Indicates link status (Linked or Searching)
3. FREQ SELECT Selects transmitted frequencies
Manual selection：CH1～CH4
Automatic selection：AUTO
In AUTO position, transmitted frequency is selected
automatically.
4. POWER MODE Selects transmitted output (HIGH/LOW)
5. POWER SW Turns ON/OFF the power of CW-5HD TX.
6. V-Mount Mounts V-Mount type Lithium Ion battery.
②
④
⑥
⑤
③
①