IDX CW-5HD - Manual (Page 21)

- 21 -
9. CW-5HD RX
Video / Audio
Video output signal HD-SDI (conforms to SMPTE 292M)
SD-SDI (conforms to SMPTE 259M-C)
Video output connector
BNC 2 type（direct loop-through of the input signal）
Audio output signal
SDI Embedded （only CH1,CH2 are transmitted）
Video format HD：1080i/59.94, 1080i/50, 1080p/29.97, 1080p/23.98, 1080PsF/23.98
720p/59.94, 720p/50
SD：525i/59.94 (NTSC or equivalent), 625i/50 (PAL or equivalent)
Radio
Frequencies 5GHz band
US version：
CH1:5745MHz, CH2:5825MHz, CH3:5180MHz, CH4:5220MH
The following frequency is included in the case of the automatic setting.
5765MHz, 5785MHz, 5805MHz, 5200MHz
Channels are selected automatically or manually.
Transmitted
output Uplink output in Unicast mode
Automatically set according to the output from CW-5HD TX.
Transmitting
method
MIMO / OFDM / JSCC
Antennas Built-in pattern antennas - 2dBi each
Number of
antennas Downlink x 5 and Uplink x 1
Display / Operation
Power switch Power ON/OFF
Battery input goes through to output side even when the power is OFF.
UNI/MULTI
switch Slide switch UNI/MULTI
UNI：Unicast mode（one-to-one link / encrypted）
MULTI：Multicast mode（one-to-multiple links / not encrypted）
Status indicator LED in 2 colours; Red, Green Ч3