Sound Devices PIX 270i - Manual (Page 88)

PIX 270i User Guide and Technical Information
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
82
Connect
or Pin Assignments
Connector Pin Assignments
Connector Pin Assignments Notes
XLR4M (2)
(Primary and Second-
ary DC Input)
1 –ground
2 –float
3 –float
4 –DC+
Pins 2 and 3 unused. When using a
single power source, use Primary con-
nector (top). ( See “Powering”, page
46 )
XLR-F (2)
(Analog Audio inputs)
1 –ground
2 –signal (+)
3 –signal (-)
Mates with XLR-Male connector
20k ohm input impedance, line level,
active-balanced
XLR-M (2)
(Analog Audio outputs)
1 –ground
2 –signal (+)
3 –signal (-)
Mates with XLR-Female connector
20k ohm input impedance, line level,
active-balanced
TRS
(Headphone output)
Tip–signal L
Ring–signal R
Sleeve–signal ground
Mates with TRS jack
SC optical
(MADI input & output)
Optical (multimode)
Mates with SC optical plug. For use with
multimode optical fiber.
BNC (2)
(Timecode input &
output)
Center pin–signal
Sleeve–ground
Mates with BNC male connector
Unbalanced, coaxial connection
BNC (2)
(SDI input & output)
Mates with BNC male connector
Unbalanced, coaxial connection, 75
ohm connectors recommended
BNC (2)
(Genlock or Wordclock
input & output)
Mates with BNC male connector
Unbalanced, coaxial connection, 75
ohm connectors recommended
BNC (2)
(MADI input and
output)
Mates with BNC male connector
Unbalanced, coaxial connection, 75
ohm connectors recommended
HDMI (2)
(HDMI input & output)
Standard HDMI Mates with HDMI Type A Plug (male)
eSATAp Female (2) Standard eSATAp Mates with eSATAp male connector