Sound Devices PIX 270i - Manual (Page 94)

PIX 270i User Guide and Technical Information
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
88
Specifications
See Sound Devices’ website for a list of approved media: www.sounddevices.com/approved
Timecode and Sync
Modes Supported Freerun, 24 Hour run, Record run, External (LTC or SDI/HDMI)
Frame Rates 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
Accuracy • +/- 0.2ppm (½ frame per 24hrs) accuracy
• Holds accurate timecode for 4 hours after power is removed
Timecode Inputs / Outputs • SDI Input BNC
• SDI Output BNC
• HDMI Input Jack (Sony protocol) • Timecode Input BNC
• Timecode Output BNC
Sync Output • Analog bi-, tri-level sync / Genlock
• Wordclock (Square wave, 3.3vp-p, 75 ohm)
Sync Input • Analog bi-, tri-level sync / Genlock
• Wordclock (Square wave, 3.3vp-p, 75 ohm)
Control
RS-422 Machine Control
Ethernet Web-based control of settings and transport (PIXNET)
GPIO GPIO on 8 pins, Phoenix connector
Keyboard
USB Keyboard Front-panel USB host. Keyboards without hubs acceptable .
Power
External • 10–27V, 60W max, via locking 4-pin XLR connectors (pin-1 = ground, pin-4 = +). See
Powering
• Primary connector powers unit. Secondary connector switched to when Primary is discon-
nected.
• Internal PowerSafe battery for safe shutdown when main power is lost.
Physical
Size (H x W x D) 3.3” x 8.6” x 10.3” (8.4 cm x 21.8 cm x 26.2 cm)
Weight 6.7 lbs
Operating Temperature -10° C to +40° C