Ultra-cut 100 – Tweco 100 Ultra-Cut User Manual
Page 38
Advertising
INSTALLATION
3-14
Manual No. 0-4748
ULTRA-CUT 100
3.09 Connect Control Cables for CNC, Remote Arc Starter, and GCM
1. Connect one end of each cable to the power supply.
2. Connect the other end of the CNC cable to the CNC device
.
3. The CNC cable shield must be attached to ground.
RETURN
SUPPLY
Art # A-04802
To CNC
To Remote Arc Starter
To Gas Control Module
Customer Wiring
Access Hole
Advertising