20 complete the installation, 20 complete the installation -41, Ultra-cut 100 – Tweco 100 Ultra-Cut User Manual
Page 65
Advertising
Manual No. 0-4748
3-41
INSTALLATION
ULTRA-CUT 100
3.20 Complete the Installation
1. Remove the cap from the coolant tank. Fill the coolant tank to the level shown, with Thermal Dynamics
coolant. The coolant level is visible through the translucent coolant tank. The amount of coolant required
varies with torch leads length.
Cat. Number and Mixture
Mixture
Protects To
7-3580 'Extra-Cool
TM
'
25 / 75
10° F / -12° C
7-3581 'Ultra-Cool
TM
'
50 / 50
27° F / -33° C
7-3582 'Extreme Cool
T M
'
Concentrate*
-65° F / -51° C
Coolant Capabilities
* For mixing with D-I Cool
TM
7-3583
RETURN
SUPPLY
RETURN
SUPPLY
Art # A-04803
COOLANT
Fill Range
Coolant Tank
2. After the complete system has been installed, check that the coolant has been pumped through the
system as follows (see NOTE):
Advertising