Tweco XTTM-301 - Manual (Page 31)

Manual 0-4768 3-13 INSTALLATION
2. Disconnect the torch leads from the bulkhead panel inside the remote arc starter. The left illustration shows
single-shielded leads connections; the right illustration shows double-shielded leads connections.
A-02282
Torch Leads
Secondary Gas
Plasma Gas (+)
Left-Hand Thread
Coolant Supply (-)
Left-Hand Thread
Coolant
Return
Torch Lead Shield
Outer (GREEN /
YELLOW)
Torch Lead
Shields
External Ground
(Customer Supplied)
Art # A-04002
Torch Leads
Secondary Gas
Plasma Gas (+)
Left-Hand Thread
Coolant Supply (-)
Left-Hand Thread
Coolant
Return
Inner (RED) Torch
Lead Shields
Single-Shielded Maximizer Leads Connections Double-Shielded Maximizer Leads Connections
3. Carefully remove the torch leads through the boot on the Remote Arc Starter.