Tweco 200 XT Auto-Cut 480V - Manual (Page 23)

AUTO-CUT 200 XT
Manual 0-5286 SPECIFICATIONS 2-7
C. Torch Parts (Generic Parts Shown)
Cartridge Shield Cup
Art # A-04741_AB
Electrode Tip
Plasma Gas
Distributor
Shield Gas
Distributor
Shield Cap
D. Parts - In - Place (PIP)
The torch is designed for use with a power supply which senses coolant return flow to confirm that torch parts are
in place. If coolant return flow to the power supply is absent or insufficient the power supply will not provide power
to the torch. Coolant leakage from the torch also indicates that torch parts are absent or installed improperly.
E. Type Cooling
Combination of gas stream through torch and liquid cooling.