Tweco 200 XT Auto-Cut 480V - Manual (Page 34)

AUTO-CUT 200 XT
3-10 INSTALLATION Manual 0-5286
3.09 Connect CNC Cable
1. Connect one end of the CNC cable to the power supply receptacle marked ‘CNC’.
2. Connect the other end of the cable to the CNC device .
3. The CNC cable shield must be attached to ground.
J15 - CNC
CB4 - 5A 120 VAC
F1 - 8A SB 230 VAC F2 - 8A SB 230 VAC
CB3 - 5A 24 VAC
CB2 - 5A 120 VAC
USER INPUT
HEIGHT CONTROL
AIR / O 2 PLASMA N 2 / H35 PLASMA
Art # A-11527_AB
To CNC