02 o-ring lubrication, 03 parts wear, O-ring lubrication -2 – Tweco 200 XT Auto-Cut 480V User Manual

Page 78: Parts wear -2, Auto-cut 200 xt

Advertising
background image

AUTO-CUT 200 XT

7-2

TORCH INFORMATION

Manual 0-5286

7.02 O-Ring Lubrication

Lubricate all three O-Rings on the Cartridge Assembly and all three O-Rings on the Torch Head periodically

with O-Ring Lubricant supplied. Remove the snap ring on the cartridge assembly and slide the locking ring

downward for access to the O-Ring under the locking ring.

O-Ring, Cat. No. 9-3029

Inner O-Ring (Cat. No. 9-3030)
Location (Under Locking Ring)

O-Ring, Cat. No. 9-3028

Art # A-04071_AC

Snap Ring

Cartridge Assembly

Art # A-04066_AC

O-Rings

Cat. No. 9-3027

Cat. No. 9-3026

Cat. No. 9-3025

Torch Head

Cat. No. 9-9041

CAUTION

Use only Thermal Dynamics No. 9-4893 O-Ring Lubricant (Christo Lube MCG-129) with this torch part. Use
of other lubricants may cause irreparable damage to the torch.

7.03 Parts Wear

Replace the Gas Distributor if it is charred or cracked.

Replace the Gas Distributor if the flange is damaged in any way.

Replace the tip and/or electrode if they are worn.

Good Electrode

Worn Electrode

Good Tip

Worn Tip

Art # A-04861

Advertising