Tweco 200 XT Auto-Cut 480V - Manual (Page 68)

AUTO-CUT 200 XT
6-2 REPLACEMENT PARTS Manual 0-5286
6.02 Leads and Cables
Refer to section 3.05 for ground connections and ground cables.
Primary power
Ground
Cable
Work
Art # A-11687_AB
Torch
Work Cable
P
O
Auto-Cut XT
Power Supply
CNC CNC Cable
Positioning
Tube
G: Torch Lead Set, Shielded
- Coolant Supply w/ Negative
- Coolant Return
- Pilot Return
- Plasma Gas
- Shield Gas
F1
Leads Catalog Numbers; Auto-Cut 200 XT Power Supply, XT-301 Torch
Leads Length
Key
Description
10 ft
3.05 m
15 ft
4.5 m
25 ft
7.6 m
35 ft
10.6 m
50 ft
15.2 m
75 ft
22.8 m
100 ft
30.5 m
125 ft
38.1 m
F1
Ground Cable, Power
Supply to Earth
9-4924 9-4925 9-4926 9-4927 9-4928 9-4929
G Torch Lead Assembly 4-3044 4-3045 4-3046 4-3047 4-3048
O Work Cable 9-9300 9-9301 9-9302 9-9303 9-9304 9-9305 9-9306 9-9307
P
Control Cable, CNC
to Power Supply
9-8312 9-8313 9-8315 9-8316 9-8317
NOTE :
Supply lead set includes Pilot Return Cable, Negative Cable, Coolant Supply & Return Hoses, and Control Cable.
Torch Lead Set
Art # A-11688
Green / Yellow 1/0 (50 mm )
F1
Work Cable
CNC Cable (14 Wire)
1/0 (50 mm ) Cable
Ground Cable,
Arc Starter
To Earth Ground
O
P
2
2
G