04 torch consumables installation, Torch consumables installation -3, Auto-cut 300 xt – Tweco 300 XT Auto-Cut 380V User Manual
Page 79
Advertising
AUTO-CUT 300 XT
Manual 0-5261
TORCH INFORMATION
7-3
7.04 Torch Consumables Installation
1. Install the consumables as follows:
Art # A-03887
WARNINGS
Do not install consumables into the Cartridge
while the Cartridge is attached to the Torch Head.
Keep foreign materials out of the consumables and Cartridge.
Handle all parts carefully to avoid damage,
which may affect torch performance.
NOTE
For 200-Amp consumables, when replacing the shield retainer or the shield cup, assemble these two parts first
before assembling the other consumables.
Shield
Retainer
Shield Cap
Shield Gas
Distr
ibutor
Tip
Plasma Gas
Distr
ibutor
Electrode
Cartridge
Art # A-11915
Assemble First
Advertising