Tweco 400 Ultra-Cut(October 2014) - Manual (Page 38)

ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
3-12 INSTALLATION Manual 0-5264
Remove fiber optic end covers and plugs.
Art # A-12015
WARNING
Disconnect primary power at the source.
Avoid the following:
1. If you need to pull the cable through a power track do not fold the fiber back on itself making a sharp bend
where it exits the hose.
Art # A-09417
2. Don’t hook onto the fiber to pull on the cable.
Art # A-09418
3. Once the fiber cable is installed in the CCM or gas control make sure the strain relief nut is securely tightened
onto the hose so the hose can’t pull out of it like this: