Tweco 400 Ultra-Cut(October 2014) - Manual (Page 50)

ULTRA-CUT 100 XT/200 XT/300 XT/400 XT
3-24 INSTALLATION Manual 0-5264
Art # A-12059
Lower screws
(2 per side)
Upper screws (2 per side)
Cover
Ground Wire
Cover Removal
3. Position the Arc Starter on a flat, horizontal mounting surface.
4. Use pre-drilled holes in at least two of the feet on the bottom of the Arc Starter to secure the Arc Starter to
the mounting surface.
Art # A-12060
Minimum 2