Tweco 95 S Thermal Arc(Jan2013) - Manual (Page 3)

!
WARNINGS
Read and understand this entire Manual and your employer’s safety practices before installing,
operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer’s best judgement, the Manu-
facturer assumes no liability for its use.
Operating Manual Number 0-5086 for:
Thermal Arc 95 S Power Source Arc Welder Part No. W1003200
Thermal Arc 95 S System with Stick Kit & Case Part No. W1003202
Thermal Arc 95 S System with Stick/TIG Kit & Case Part No. W1003203
Published by:
Victor Technologies International Inc.
16052 Swingley Ridge Road,
Suite 300 St, Louis, MO 63017
USA
www.thermalarc.com
Copyright © 2013 by
Victor Technologies International, Inc.
® All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any loss or damage
caused by any error or omission in this Manual, whether such error results from negligence, accident, or
any other cause.
Publication Date: March 26, 2009
Revision AC Date: January 04, 2013
Record the following information for Warranty purposes:
Where Purchased: ____________________________________
Purchase Date: ____________________________________
Equipment Serial #: ____________________________________
i