Tweco 300 ACDC Arcmaster User Manual
Page 33
27
Feature Description
Save/Load Function
• A total number of 5 programs can be saved into the
300 AC/DC memory.
SAVE
the Current Weld Parameters into Memory
• Press and HOLD the
SAVE
button. Beep will sound and
Digital Meter display will show a number 1.
• Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
• After selecting the desired memory location (i.e. to 5),
press the right scroll button and the machine will give a
beep to confirm the weld parameters from the control
panel are saved.
LOAD
(retrieve) a Program to Control Panel
• Press and HOLD the
LOAD
button. Beep will sound and
Digital Meter display will show a number 1.
• Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will give a beep to
confirm the weld parameters are loaded onto the control panel.
Table 4-6. (continued) Power Source Features