06 save-load operation – Tweco 300 ACDC Arcmaster User Manual
Page 39
33
6.06 Save-Load Operation
A total number of 5 programs can be saved into the 300 AC/DC memory.
SAVE
the Current Weld Parameters into Memory
• Press and HOLD the
SAVE
button. Beep will sound and Digital Meter display will show a number 1.
• Select a memory location by rotating the control knob, 1 to 5 is displayed on the meter.
• After selecting the desired memory location (i.e. 1 to 5), press the right scroll button and the machine will give a
beep to confirm the weld parameters from the control panel are saved.
LOAD
(retrieve) a Program to Control Panel
• Press and HOLD the
LOAD
button. Beep will sound and Digital Meter display will show a number 1.
• Select a memory location by rotating the control knob, 1 to 5 is displayed on the meter.
• After selecting the desired memory location (i.e. 1 to 5), press the right scroll button and the machine will give a beep
to confirm the weld parameters are loaded onto the control panel.