09 installing wire spool, 09 installing wire spool -7 – Tweco 180 Portable MIG User Manual
Page 31
Advertising
INSTALLATION
FABRICATOR 140, 180
July 20, 2007
3-7
Manual 0-4991
Art # A-07905
1
2
3
4
Figure 3-6: 4" Spool Installation
3.09 Installing Wire Spool
As delivered from the factory, the unit is set for an 4”
(102mm) spool.
Installation of 4” (102mm) Spool
Assemble parts in sequence (shown in Figure 3-6 from
right to left).
1. Spool 4” (102mm)
2. "D" Washer
3. Retaining Spring
4. Nut
NOTE
Nut is tightened until a slight force is required
to turn the spool\
Advertising
This manual is related to the following products: