Tweco 180 Portable MIG - Manual (Page 62)

FABRICATOR 140, 180 APPENDIX
Manual 0-4991 A-6 July 20, 2007
APPENDIX 4: FEED ROLL KITS
Part No.
7977036
Feed Roll .023/.030” (0.6 / 0.8mm) Hard Wire
7977660 Feed Roll .035/.045” (0.9 / 1.2mm) Hard Wire
7977731 Feed Roll .030/.035” (0.8 / 0.9mm) Soft Wire
7977732 Feed Roll .030/.035” (0.8 / 0.9mm) Cored Wire
7977264
704277
Feed Roll .045/1/16” (1.2 / 1.6mm) Cored Wire
W7004022
Size visible when
fitting the feedroll is
the groove size in use
FEED ROLL INSTALLATION & PARTS GUIDE
Description
Guide, Inlet, 023-035
Feed Roll .040/.045” (1.0-1.2mm) Soft Wire
.030
0.8