Tweco 180 Portable MIG - Manual (Page 57)

APPENDIX FABRICATOR 140, 180
July 20, 2007 A-1 Manual 0-4991
APPENDIX 1: OPTIONS AND ACCESSORIES
• Contact your Thermal Arc distributor to order options and accessories. For assistance in locating a Thermal Arc
distributor, contact the Thermadyne office listed in the inside rear cover that is nearest to you.
• Note the model and specification number shown on the equipment nameplate.
For Tweco/Victor Inquiries and Orders:
Call 1-800-318-6819 Consumable Parts Management Group
EQUIPMENT OPTIONS PART NO Description
GUNS
Tweco® WeldSkill 10ft W4011400
Gun Assembly with 10ft cable (supplied with package), 180
Amp @ 30%
ACCESSORIES
Victor Regulator/Flowmeter Mixed Gases 0781-2723
Medalist™ 1400 Series, HRF Flowmeter Regulator, Argon-
Argon/CO2 mix gases
Victor Regulator/Flowmeter CO2 0781-2725 Medalist™ 1400 Series, HRF Flowmeter Regulator, CO2 gas
CONSUMABLES
Feedroll Kits
Feedroll .023”-.030”/.035” (0.6-0.8/0.9mm) 7977036 V grooved for hard wire
Feedroll .035”-.045” (0.9-1.2mm) 7977660 V grooved for hard wire
Feedroll .030”-.035” (0.8-0.9mm) 7977731 U grooved for soft wire
Feedroll .040”-.045” (1.0-1.2mm) 7977264 U grooved for soft wire
Feedroll .030”-.035” (0.8-0.9mm) 7977732 V grooved knurl for cored wire
Feedroll .045”-.1/16” (1.2-1.6mm) 704277 V grooved knurl for cored wire
Contact Tips
11-23 .023” (0.6mm)
11-30 .030” (0.8mm)
11-35 .035” (.09mm)
11-40 .040” (1.0mm)
11-45 .045” (1.2mm)
Nozzles
21-37 3/8” (9.5mm)
21-50 1/2” (12.7mm)
21.62 5/8” (16mm)
Wire Liners
42-23-15 .023”, 15 ft.(7.6m)
42-3035-15 .030-.035”, 15ft. (4.5m)
42-4045-15 .040-.045”, 15ft. (4.5m)
42N-3545-15 .035-3/64”, 15ft. (4.5m)
Gas Diffuser 51