LaMotte SMART 2 - Manual (Page 27)

TESTING
n
TESTING MENU
The Testing Menu is used to run all LaMotte pre-programmed tests, USER
TESTS
and Absorbance tests at one of four wavelengths. Testing from any of
three sequences can also be done.
1. Press the
ON button to turn on the
SMART2 Colorimeter. The LaMotte logo
will appear for about 2 seconds and the the
Start screen appears. Press the
Q/ENTER
button to begin testing.
VER 1.0
Smart2
* Start
2. The MAIN MENU will appear. Press the
Q/ENTER button to select Testing Menu.
MAIN MENU
* Testing Menu
Editing Menu
PC Link
3. Scroll with the
t or s buttons and make
a selection with the
Q/ENTER button.
All Tests has all the available tests. The
three sequences have selected tests and
Absorbance
has %T/ABS tests.
TESTING MENU
* All Tests
Sequence 1
Sequence 2
Sequence 3
Absorbance
SMART2 COLORIMETER 1.07 27