LaMotte SMART 2 - Manual (Page 49)

n
FACTORY SETUP
The Factory Setup menu is used in the manufacturing of the SMART2
Colorimeter. This menu is not for use by the operator in the field.
n
SETTING THE POWER SAVING FUNCTION
The SMART2 Colorimeter has a power saving function that turns the meter
off after an interval of inactivity. If no buttons have been pressed during that
interval the meter will turn itself off. This interval can be disabled or set for 5,
15, 30 or 60 minutes. The default setting is 5 minutes.
From the EDITING MENU use the
t button to
scroll to Set PWR Save. Press
Q/ENTER to
select.
EDITING MENU
* Edit Sequences
Edit User Test
Set Clock
Edit Logging
Factory Setup
Set PWR Save
The current setting is always displayed next to
the *. To change the setting, use the
t or s
buttons to scroll to the appropriate setting. Press
Q/ENTER to select.
Disabled
AUTO SHUTOFF
* 5 Minutes
15 Minutes
30 Minutes
60 Minutes
The meter will display the message “Storing”
and return to the EDITING MENU
.
Storing
EDITING MENU
* Set PWR Save
SMART2 COLORIMETER 1.07 49