LaMotte SMART 2 - Manual (Page 42)

n
SELECTING THE VIAL AND WAVELENGTH
The Smart2 Colorimeter has three different vials (the 25 mm 0290 tube,
UDVs and COD tubes) and 4 different wavelengths (430, 520, 570, and
620 nm). The colorimeter uses different settings for each of the twelve
combinations of vial and wavelength. These twelve settings are called
channels. Choose the channel with the correct wavelength and vial for the
test.
Use the
t button to scroll to Select
Vial/WL and press
Q/ENTER button to select.
EDIT USER TEST01
* Name The Test
Select Vial/WL
New Calibration
Decimal Places
Select Units
Use the
t and s buttons to scroll to the
appropriate channel and press
Q/ENTER button
to select.
NOTE: This is a looping menu.
: : :
Ch11 620nm COD
Ch12 570nm COD
SELECT CHANNEL
* Ch1 520nm 25mm
Ch2 430nm 25mm
Ch3 620nm 25mm
Ch4 570nm 25mm
Ch5 520nm UDV
Ch6 430nm UDV
: : :
The meter will display the message “Storing”
and return to the EDIT USER TEST01 menu.
Storing
EDIT USER TEST01
* Select The Vial/WL
New Calibration
Decimal Places
Select Units
42 SMART2 COLORIMETER 1.07