LaMotte WaterLink 3 Express Lab - Manual (Page 22)

SETTING THE DATA LOGGER 
The default setting for the data logger is disabled. When enabled, the meter
will log the last 500 data points. This function may be helpful when used
in the field. The counter in the center bottom of the display will show how
many tests have been logged. The display will show 500+ when the data
logger has exceeded 500 points and the data points are being overwritten.
The meter will log the following data: test name, test result, time of test and
date of test.
Press and briefly hold 1. to turn the meter on.
Press 2. to scroll to Logging.
Press 3.
ENTER
to select Logging. Press
ENTER
to display the last data
point and the time that it was logged.
Press
4. or to scroll to the desired setting.
Press 5.
ENTER
to save the selection.
Press 6.
EXIT
to go back to the Main Menu or to turn meter off.
SETTING THE POWER SAVE 
The power saving auto shutoff feature will turn the meter off when a button
has not been pushed for a set amount of time. The Power Save function is
factory set at disable.
Press and briefly hold 1. to turn the meter on.
Press 2. to scroll to Setup.
Press 3.
ENTER
to select Setup. Press or to scroll to Set PWR
Save.
Press
4.
ENTER
to select Set PWR Save. Press or to scroll to
the desired setting.
Press
5.
ENTER
to save the selection.
Press 6.
EXIT
to go back to the Main Menu or to turn meter off.
SETTING THE BACKLIGHT TIME 
The backlight illuminates the display for enhanced viewing. If Button Control
is chosen the backlight button on the key pad will act as an on/off switch
and the backlight will remain on or off when the meter is being used. When
one of the other settings—10, 20 or 30 seconds—is chosen, the display will
be illuminated for the specified amount of time after any button is pressed.
The backlight feature uses a significant amount of power. The longer the
backlight is on, the more frequently the battery will have to be charged if the
USB/Wall adapter is not being used. This feature has been factory set at 10
seconds.
22
Setting up the W
aterLink
®
3 Express Colorimeter