LaMotte WaterLink 3 Express Lab - Manual (Page 8)

GENERAL OPERATING PROCEDURES
THE KEYPAD 
The keypad has 6 buttons which are used to perform specific tasks.
This button will scroll up through a list of menu selections.
ENTER
The button is used to select choices in a menu viewed in
the display.
This button controls the backlight on the display.
This button will scroll down through a list of menu
selections.
EXIT
This button exits to the previous menu.
This button turns the meter on or off.


EXIT
ENTER
THE DISPLAY & THE MENUS 
The display has a header line at the top and a footer line at the bottom. The
header displays the title of the current menu. The footer line displays the
time and the date, the data logger status and the battery status. The menu
selection window is in the middle of the display between the header and the
footer. Some of the menus are looping menus. The top and bottom menus
are connected in a loop. Scrolling down past the bottom of the menu will
lead to the top of the menu. Scrolling up past the top of the menu will
lead to the bottom of the menu. A black bar will indicate the menu choice.
Pressing
ENTER
will select the menu choice that is indicated by the black
bar. The
EXIT
button allows an exit or escape from the current menu and a
return to the previous menu. Pressing at any time will turn the meter
off.
UDV SAMPLE HOLDER 
Position the UDV Adapter (Code 1724) so that
the notches in the adapter fit around the posts on
the chamber. Turn the adapter counterclockwise
until the arrows are at the top and bottom of the
chamber and the adapter is locked in place. Turn
the adapter clockwise to unlock the adapter and
remove it from the chamber.
8