Wheatheart Hydrostatic Portable and Truck-Mount Super Sweep - Manual (Page 11)

W HEATHEART - H YDROSTATIC B IN S WEEP 2. S AFETY F IRST
S TANDARD , P ORTABLE , T RUCK M OUNT , & S UPER S WEEP 2.8. S AFETY D ECAL L OCATIONS
IM1 R3 11
2.8.1. D
ECAL
I
NSTALLATION
1. Decal area must be clean and dry, with a temperature above 10°C (50°F).
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion
with the exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining
portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign
backing paper.
2.8.2. D ECAL L OCATIONS
Replicas of the safety decals that are attached to the equipment are shown
below. Good safety requires that you familiarize yourself with the various safety
decals and the areas or particular functions that the decals apply to as well as
the safety precautions that must be taken to avoid serious, injury, death, or
damage.
Figure 2.1