Great Plains 3PYP Operator Manual - Manual (Page 19)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 15
2014-09-09 Table of Contents Index 401-312M
Electrical Hookup
Refer to Figure 7
Your 3PYP is equipped with several standard and
optional devices that require separate electrical
connections. For future reference, note any optional
connections on this checklist.
Make sure tractor is shut down with accessory power off
before making connections.
These connections may be made in any order. The key
requirement is that all connections be made prior to
planter movement.
Note: Switch control boxes should be mounted in your
tractor cab in a location with easy access. Route
wiring harnesses with enough slack to allow for
tractor movement, especially on articulating
tractors.
✔
Lights
✔
DICKEY-john
®
Planter Control
✔
Steering ECU
❑ ___________________________
❑ ___________________________
❑
___________________________
Figure 7
Connector Identification
25236
25237
25238
1
2
3
1
2
3
4
5
6