Great Plains 3PYP Operator Manual - Manual (Page 9)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 5
2014-09-09 Table of Contents Index 401-312M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the back of the planter walkboard;
one total
838-266C
Red Reflectors
On the back of seed box support structure each end
(above wheels) and on the back of the wing tool bars,
each end, two each side:
four total
25051
25051