Great Plains 3N-3020P Operator Manual - Manual (Page 9)

4/23/2010 196-248M
7 Important Safety Information
Safety Decals
Your implement comes equipped with all safety
decals in place. They were designed to help you
safely operate your implement.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order
new decals from your Great Plains dealer.
Refer to this section for proper decal place-
ment.
▲ When ordering new parts or components, also
request corresponding safety decals.
▲ To install new decals:
1. Clean the area on which the decal is to be
placed.
2. Peel backing from decal. Press firmly on
surface, being careful not to cause air
bubbles under decal.
818-003C
Slow Moving Vehicle Label
838-266C
Red Reflectors
Reflectors on outside ends of center section walk-
board; two reflectors total
19100
19100