Great Plains V-300F Operator Manual - Manual (Page 48)

V-300, V-300F
148-057M 6/29/2006
46
Select Metric/Imperial Units
1. Press and hold the button while plugging the instrument into a
power source to enter program mode 2.
2. Press to select the channel.
3. PRESS to switch between metric and imperial.
The top row of horizontal segments indicates metric units are selected and
the bottom row indicates imperial units are selected.
4. Unplug the instrument, then plug in again to resume the normal dis-
play mode.
Function Metric Imperial
Fwd Speed kph mph
Area Ha acres
Width/S.S.F. meters inches
Forward Speed
Display Forward Speed
Select the channel.
Forward Speed displays for 10 seconds before returning to the tramline
display.
1
3 2
3
Enter Cal Mode 2
Change Units
Display Forward Speed