Great Plains LS12 Operator Manual - Manual (Page 15)

3/20/06 117-055M
13 Operating Instructions
Operating Instructions
This section covers general operating proce-
dures. Experience, machine familiarity and the
following information will lead to efficient opera-
tion and good working habits. Always operate
farm machinery with safety in mind.
Prestart Checklist
!
WARNING
Escaping fluid under pressure can have sufficient pres-
sure to penetrate the skin. Check all hydraulic lines
and fittings before applying pressure. Fluid escaping
from a very small hole can be almost invisible. Use pa-
per or cardboard, not body parts, and wear heavy
gloves to check for suspected leaks. If injured, seek
medical assistance from a doctor that is familiar with
this type of injury. Foreign fluids in the tissue must be
surgically removed within a few hours or gangrene
will result.
1. Read “Important Safety Information,” page 1,
carefully.
2. Check all bolts, pins and fasteners. Torque as
specified on “Torque Values Chart,” page 23.
3. Lubricate as recommended areas listed un-
der “Lubrication,” page 20.
4. Check seeder for worn or damaged parts. Re-
pair or replace parts before going to the field.
5. Check hydraulic hoses and fittings for leaks.
Repair or replace before going to the field.
6. Check that seed cups and drive are working
properly and free from foreign material.
!
DANGER
Watch your step when walking on seeder ladder and
walkboard. Falling from seeder could cause severe in-
jury or death.