Great Plains LS12 Operator Manual - Manual (Page 17)

3/20/06 117-055M
15 Operating Instructions
Parking
!
WARNING
Always park implement with plow wings swept back
and rear parking stand in the parking position for
maximum stability.
For information on long-term storage, refer to
“Storage,” page 21.
1. Park implement on a level, solid surface.
2. Lower implement to the ground.
3. Shut off tractor.
4. Unplug hydraulic hoses from tractor outlets.
Position hoses on seeder frame so hose ends
are off the ground.
5. Place rear parking stand in position shown in
Figure 8.
6. Unhitch levee plow from tractor.
Figure 8
Rear Parking Stand
18350