Great Plains LS12 Operator Manual - Manual (Page 6)

LS10 and LS12
117-055M 3/20/06
4
Practice Safe Maintenance
▲ Understand procedure before doing work. Use
proper tools and equipment. Refer to this man-
ual for additional information.
▲ Work in a clean, dry area.
▲ Lower seeder and plow, put tractor in park,
turn off engine, and remove key before per-
forming maintenance.
▲ Make sure all moving parts have stopped and
all system pressure is relieved.
▲ Allow seeder parts to cool completely.
▲ Do not grease or oil seeder while it is in opera-
tion.
▲ Inspect all parts. Make sure parts are in good
condition and installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from
seeder before operation.
Prepare for Emergencies
▲ Be prepared if a fire starts.
▲ Keep a first aid kit and fire extinguisher handy.
▲ Keep emergency numbers for doctor, ambu-
lance, hospital and fire department near
phone.
911
OFF