Parking, Storage, Parking storage – Great Plains CTA4000 Operator Manual User Manual
Page 36
32 CTA4000
160-269M-A
08/03/2010
Parking
Following these steps when parking the implement for
periods of less than 36 hours. For longer periods, see
Storage, the next topic.
1.
Spot the implement on firm, level ground.
2.
Raise the implement. Fold as necessary for the park-
ing space available.
3.
Set the Transport/Field valve handle to TRANS.
4.
Perform the air cart parking checklist.
5.
Securely block cart tires to prevent rolling.
Storage
If possible, leave the cart and implement connected for
extended storage.
Store the cart and implement where children do not play.
If possible, store them inside for longer life.
1.
Perform the cart Storage checklist.
2.
Perform the implement Parking checklist.
3.
Lubricate the implement at all points listed under
“Lubrication” on page 51.
4.
Check all bolts, pins, fittings and hoses. Tighten,
repair or replace parts as needed.
5.
Check all moving parts for wear or damage. Make
notes of any parts needing repair before the next
season.
6.
Plug or cap seed delivery tubes to prevent pest entry.
7.
If the cart is disconnected from the implement for
storage, plug all 2
1
⁄
2
-inch (64mm) openings to pre-
vent pests from entering and nesting.
8.
Use touch-up paint to cover scratches, chips and
worn areas to prevent rust.