Great Plains 2S-2600HDF Operator Manual v2 - Manual (Page 33)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 29
2014-02-03 Table of Contents Index 195-069M
Transport Checklist
Before transporting the drill, check the following items:
❑ Transport only with a tractor of proper size. See
“Specifications and Capacities” on page 104.
❑ Safety Chain in Place (page 14) - Attach safety
chain to an anchor on tractor.
❑ Drill Securely Hitched (page 14) - Always use a
locking-style pin sized to match holes in hitch and
drawbar (minimum of 1in (2.4cm) diameter).
❑ Openers Raised and Locked (page 24) - Lock
openers up into ROAD position.
❑ Tires (page 104) - Check that all tires are properly
inflated
❑ Bystanders - Check that no one is in the way before
moving. Do not allow anyone to ride on the drill.
❑ Warning Lights - Always use tractor and drill warn-
ing lights in transport.
❑ Clearance (page 104) - Know the maximum dimen-
sions of the drill in transport position and follow a
route that provides adequate clearance from all
obstructions.
❑ Stopping Distance - Allow sufficient stopping dis-
tance and reduce speed prior to any turns or maneu-
vers. If the drill is transported full, allow extra
stopping distance.
❑ Road Rules -Comply with all national, regional and
local laws when transporting on public roads.
❑ Parking Stands Raised (page 44) - Rotate stands
up and pin.
❑ Walkboard Ladders Raised - (if equipped)
❑ Drill Raised and Locked (page 25) - Make sure drill
is folded properly. Secure cylinder lock channels on
transport-cylinder rods and front box lift cylinders.
Allow transport lift cylinders to settle against lock
channels.