Great Plains 2S-2600HDF Operator Manual v2 - Manual (Page 69)

Great Plains Manufacturing, Inc. Table of Contents Index Adjustments 65
2014-02-03 Table of Contents Index 195-069M
Row Unit Adjustments
Refer to Figure 62
(which depicts a row unit fully populated with all optional
accessories supported for use with the 2S-2600HD drill)
From front to back, a Great Plains 00HD Series row unit
can include the following capabilities (some optional):
1. Opener height adjustment: standard
If a few rows need to run deeper, such as in tire
tracks, the arm’s pivot point may be lowered. See
“Opener Height” on page 66.
2. Single Down Pressure Spring: standard
Each row unit is mounted on the drill as a pivoting
arm which allows the row unit to independently move
up and down. The adjustable spring provides the
force to get the row unit and attachments into the
soil. See “Row Unit Down Pressure (Spring)” on
page 66.
3. Disc Blades: standard, 2 per row unit
Double disc blades open a furrow, creating the seed
bed. Spacers adjust the blades for a clean furrow.
See “Disk Blade Adjustments” on page 67.
4. Seed delivery tube: standard
No adjustments are necessary.
5. Disk Scraper: optional
In sticky soils, a scraper helps keep the opener disks
operating freely. See “Disk Scraper Adjustments”
on page 68.
6. Fertilizer delivery tube: optional
The tube may be reversed to drop fertilizer with the
main seed, or just ahead of the press wheels.
7. Small Seeds delivery tube: optional
The tube may be reversed to drop small seed near
the main seed tube, or just ahead of the press
wheels.
If fertilizer is also installed, the Small Seeds tube is
mounted outside the opener frame.
8. Seed firmer: seed flap (not shown) standard:
Keeton seed firmer (shown)
Improves seed-soil contact, and provides a stable
arm for a low-rate liquid fertilizer delivery tube. See
“Keeton Seed Firmer Adjustment” on page 68.
Seed-Lok™ firming wheel (not shown)
Improves seed-soil contact. See “Seed-Lok™ Seed
Firmer Lock-Up” on page 69.
9. Press wheels: standard (choice of types)
These close the seed trench. The wheels also sup-
port the free end of the row unit, and provide the pri-
mary control over seeding depth. See “Opener
Depth (Press Wheel Height)” on page 69.
Certain Machine Damage:
Do not back up with row units in the ground. To do so will
cause severe damage and row unit plugging.
Figure 62
00HD Series Row Unit
26427
1
2
3
5
4
8
9
6
7